Figure 62: Configuring Load Balancing - Edge-Core ECS4620-28T Quick Start Manual

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

Source and Destination MAC Address: All traffic with the same source

and destination MAC address is output on the same link in a trunk. This

mode works best for switch-to-switch trunk links where traffic through the

switch is received from and destined for many different hosts.

Source IP Address: All traffic with the same source IP address is output on

the same link in a trunk. This mode works best for switch-to-router or

switch-to-server trunk links where traffic through the switch is received

from many different hosts.

Source MAC Address: All traffic with the same source MAC address is

output on the same link in a trunk. This mode works best for switch-to-

switch trunk links where traffic through the switch is received from many

different hosts.

These parameters are displayed for the load balance mode:

Destination IP Address - Load balancing based on destination IP address.

Destination MAC Address - Load balancing based on destination MAC

Source and Destination IP Address - Load balancing based on source and

destination IP address.

Source and Destination MAC Address - Load balancing based on source and

destination MAC address.

Source IP Address - Load balancing based on source IP address.

Source MAC Address - Load balancing based on source MAC address.

Web Interface

To display the load-distribution method used by ports in aggregated links:

Click Interface, Trunk, Load Balance.

Select the required method from the Load Balance Mode list.

Click Apply.

Figure 62: Configuring Load Balancing

| Interface Configuration

Trunk Configuration

Show Quick Links

Table of Contents