Edge-Core ECS4620-28T Quick Start Manual page 85

Table 4: Switch Main Menu
Menu
Passive Interface
Add
Show
Neighbor Address
Add
Show
Redistribute
Add
Show
Distance
Add
Show
Interface
Add
Show
Modify
Statistics
Show Interface Information
Show Peer Information
Reset Statistics
OSPF
Network Area
Add
Show
Show Process
System
Configure
Show
(Continued)
Description
Stops RIP broadcast and multicast messages from being sent on
specified network interfaces
Shows the configured passive interfaces
Configures the router to directly exchange routing
information with a static neighbor
Shows adjacent hosts or interfaces configured as a neighboring router
Imports external routing information from other routing domains (that
is, protocols) into the autonomous system
Shows the external routing information to be imported from other
routing domains
Defines an administrative distance for external routes learned from
other routing protocols
Shows the administrative distances assigned to external routes learned
from other routing protocols
Configures RIP parameters for each interface, including send and
receive versions, authentication, and method of loopback prevention
Shows the RIP parameters set for each interface
Modifies RIP parameters for an interface
Shows RIP settings, and statistics on RIP protocol messages
Displays information on neighboring RIP routers
Clears statistics for RIP protocol messages
Open Shortest Path First (Version 2)
Defines OSPF area address, area ID, and process ID
Shows configured areas
Show configured processes
Configures the Router ID, global settings, and default information
Shows LSA statistics, administrative status, ABR/ASBR, area count, and
version number
Chapter 2
– 79 –
| Using the Web Interface
Navigating the Web Browser Interface
Page
705
705
705
706
706
706
707
707
707
709
709
709
710
710
710
710
714
715
715
716
717
717
717
717
720
720
723