Figure 361: Assigning An Interface To An Ipv6 Multicast Service; Figure 362: Showing Static Interfaces Assigned To An Ipv6 Multicast Service - Edge-Core ECS4620-28T Quick Start Manual

Chapter 14
| Multicast Filtering
MLD Snooping (Snooping and Query for IPv6)
Web Interface
To statically assign an interface to an IPv6 multicast service:
1.
Click Multicast, MLD Snooping, MLD Member.
2.
Select Add Static Member from the Action list.
3.
Select the VLAN that will propagate the multicast service, specify the interface
attached to a multicast service (through an MLD-enabled switch or multicast
router), and enter the multicast IP address.
4.
Click Apply.

Figure 361: Assigning an Interface to an IPv6 Multicast Service

To show the static interfaces assigned to an IPv6 multicast service:
1.
Click Multicast, MLD Snooping, MLD Member.
2.
Select Show Static Member from the Action list.
3.
Select the VLAN for which to display this information.

Figure 362: Showing Static Interfaces Assigned to an IPv6 Multicast Service

– 572 –