Displaying PIM
Neighbor Information
Figure 524: Configuring PIM Interface Settings (Sparse Mode)
Use the Routing Protocol > PIM > Neighbor page to display all neighboring PIM
routers.
Parameters
These parameters are displayed:
◆
Address – IP address of the next-hop router.
◆
VLAN – VLAN that is attached to this neighbor.
◆
Uptime – The duration this entry has been active.
◆
Expire – The time before this entry will be removed.
◆
DR – Indicates if a neighbor is the designated router.
Web Interface
To display neighboring PIM routers:
1.
Click Routing Protocol, PIM, Neighbor.
Figure 525: Showing PIM Neighbors
– 765 –
Chapter 20
| Multicast Routing
Configuring PIM for IPv4