Figure 319: Showing Information On Local Meps; Displaying Local Meps - Edge-Core ECS4620-28T Quick Start Manual

28/52-port l3 stackable gigabit ethernet switch

Hide thumbs Also See for ECS4620-28T:

Table of Contents

| Basic Administration Protocols

Connectivity Fault Management

Use the Administration > CFM > Show Information (Show Local MEP) page to show

information for the MEPs configured on this device.

These parameters are displayed:

MEP ID – Maintenance end point identifier.

MD Name – Maintenance domain name.

Level – Authorized maintenance level for this domain.

Direction – Direction in which the MEP communicates CFM messages:

Down indicates that the MEP is facing away from the switch, and transmits

CFM messages towards, and receives them from, the direction of the

physical medium.

Up indicates that the MEP faces inward toward the switch cross-connect

matrix, and transmits CFM messages towards, and receives them from, the

direction of the internal bridge relay mechanism.

Primary VLAN – Service VLAN ID.

Interface – Physical interface of this entry (either a port or trunk).

CC Status – Shows administrative status of CCMs.

MAC Address – MAC address of this MEP entry.

Web Interface

To show information for the MEPs configured on this device:

Click Administration, CFM.

Select Show Information from the Step list.

Select Show Local MEP from the Action list.

Figure 319: Showing Information on Local MEPs

Show Quick Links

Table of Contents