Figure 100: Configuring Static Mac Addresses; Figure 101: Displaying Static Mac Addresses - Edge-Core ECS4620-28T Quick Start Manual

Chapter 6
| Address Table Settings
Setting Static Addresses
Web Interface
To configure a static MAC address:
1.
Click MAC Address, Static.
2.
Select Add from the Action list.
3.
Specify the VLAN, the port or trunk to which the address will be assigned, the
MAC address, and the time to retain this entry.
4.
Click Apply.

Figure 100: Configuring Static MAC Addresses

To show the static addresses in MAC address table:
1.
Click MAC Address, Static.
2.
Select Show from the Action list.

Figure 101: Displaying Static MAC Addresses

– 200 –