Edge-Core ECS4620-28T Quick Start Manual page 937

3
prompt
General Commands
The general commands are used to control the command access mode,
configuration mode, and other basic functions.
Table 7: General Commands
Command Function
prompt Customizes the CLI prompt
reload Restarts the system at a specified time, after a specified delay, or at a
periodic interval
enable Activates privileged mode
quit Exits a CLI session
show history Shows the command history buffer
configure Activates global configuration mode
disable Returns to normal mode from privileged mode
reload Restarts the system immediately
show reload Displays the current reload settings, and the time at which next
scheduled reload will take place
end Returns to Privileged Exec mode
exit Returns to the previous configuration mode, or exits the CLI
help Shows how to use help
? Shows options for command completion (context sensitive)
This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
Default Setting
Console
– 107 –
Mode
GC
GC
NE
NE, PE
NE, PE
PE
PE
PE
PE
any config.
mode
any mode
any mode
any mode