Figure 94: Configuring Vlan Mirroring; Figure 95: Showing The Vlans To Mirror - Edge-Core ECS4620-28T Quick Start Manual

Chapter 5
| VLAN Configuration
Configuring VLAN Mirroring
◆
When traffic matches the rules for both port mirroring, and for mirroring of
VLAN traffic or packets based on a MAC address, the matching packets will not
be sent to target port specified for port mirroring.
Parameters
These parameters are displayed:
◆
Source VLAN – A VLAN whose traffic will be monitored. (Range: 1-4094)
◆
Target Port – The destination port that receives the mirrored traffic from the
source VLAN. (Range: 1-28/52)
Web Interface
To configure VLAN mirroring:
1.
Click VLAN, Mirror.
2.
Select Add from the Action list.
3.
Select the source VLAN, and select a target port.
4.
Click Apply.

Figure 94: Configuring VLAN Mirroring

To show the VLANs to be mirrored:
1.
Click VLAN, Mirror.
2.
Select Show from the Action list.

Figure 95: Showing the VLANs to Mirror

– 194 –