Oracle X7-2 Service Manual page 128

Remove an M.2 Mezzanine
2. Remove any PCIe card in PCIe slot 3 and the internal HBA in PCIe slot 4.
See "Remove a PCIe Card From PCIe Slot 3" on page 124
Card and HBA Super Capacitor" on page
Note -
mezzanine. Extract the PCIe cards (with cables attached) from the PCIe slots and set them
aside.
Using a T10 Torx screwdriver, remove the screws that secure the M.2 mezzanine
3.
to the PCIe riser.
4. Lift and remove the M.2 mezzanine from the PCIe riser connector.
Place the M.2 mezzanine on an antistatic mat. If required, perform the procedures for removing
the M.2 flash SSDs from the mezzanine. See
Related Information
"Install an M.2 Mezzanine" on page 129
■
128 Oracle Server X7-2 Service Manual • October 2017
You do not need to remove the data cables from the PCIe cards when servicing the M.2
and "Remove the Internal HBA
170.
"Remove an M.2 Flash SSD" on page 130.