Oracle X7-2 Service Manual page 198

Install the Power, FIM, Temperature Sensor, and Disk Backplane Data Cables
b. Connect the disk backplane power cable to the motherboard by plugging the
cable connector into the motherboard connector [1].
5. Return the server to operation.
a. Install the server top cover.
See
Return the server to the normal rack position.
b.
See
c. Power on the server.
See
Verify that the System OK status indicator is steady on.
Related Information
"Remove the Power, FIM, Temperature Sensor, and Disk Backplane Data
■
Cables" on page 194
198 Oracle Server X7-2 Service Manual • October 2017
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Power On the Server" on page
210.
214.
212.