Oracle X7-2 Service Manual page 208

Install the Motherboard
5. Return the server to operation.
Install the server top cover.
a.
See
b. Return the server to the normal rack position.
See
Reconnect the data cables to the server and reconnect the power cords to
c.
the server power supplies.
See
Power on the server.
d.
See
Verify that the System OK status indicator is steady on.
Note -
the product serial number (PSN) into the new motherboard. This is necessary because the
motherboard is a secondary member of a select group (or quorum) of components used for
maintaining the PSN for service entitlement, and if you replace more than one of the quorum
members during any given service procedure, a secondary quorum member might need to be
programmed with the PSN.
Related Information
"Customer-Replaceable Units" on page 21
■
"Field-Replaceable Units" on page 22
■
"Remove the Motherboard" on page 199
■
208 Oracle Server X7-2 Service Manual • October 2017
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Data Cables and Power Cords" on page
"Power On the Server" on page
IMPORTANT: After replacing the motherboard, you might need to manually program
210.
214.
214.
212.