Install The Front Indicator Module - Oracle X7-2 Service Manual

3. Carefully slide the FIM assembly toward the front of the server to remove it from
the chassis [2].
Using a Phillips screwdriver, remove the two screws that secure the plastic
4.
temperature sensor housing to the FIM assembly, and then detach the housing
from the FIM assembly [2].
You do not need to remove the temperature sensor from the housing.
Note -
5. Disconnect the FIM cable from the FIM assembly and set the FIM assembly aside
[3].
6. Continue to
Related Information
"Install the Front Indicator Module" on page 159
■

Install the Front Indicator Module

Attach an antistatic wrist strap to your wrist, and then to a metal area on the
1.
chassis.
See "Take Antistatic Measures" on page
2. Unpack the replacement FIM and place it on an antistatic mat.
"Install the Front Indicator Module" on page
61.
Servicing the Front Indicator Module (FRU)
Install the Front Indicator Module
159.
159