Install an M.2 Mezzanine
Unpack the replacement M.2 mezzanine and place it on an antistatic mat.
1.
If required, ensure that you have installed the M.2 flash SSDs on to the M.2 mezzanine before
installing the mezzanine on to the PCIe riser. See
2.
Align the M.2 mezzanine with the connector and screw holes on the PCIe riser
and then insert the mezzanine into the connector.
Using a T10 Torx screwdriver, install the screws that secure the M.2 mezzanine
3.
to the PCIe riser.
4.
Install the internal HBA card in PCIe slot 4 and any PCIe card in PCIe slot 3.
See
"Install the Internal HBA Card and HBA Super Capacitor" on page 173
PCIe Card in PCIe Slot 3" on page
Install the PCIe riser.
5.
See
"Install the PCIe Riser Into PCIe Slots 3 and 4" on page
"Install an M.2 Flash SSD" on page
125.
Servicing the Internal M.2 Flash SSDs (CRU)
Install an M.2 Mezzanine
and
"Install a
118.
131.
129