Oracle X7-2 Service Manual page 148

Install a Processor
5. Return the server to operation.
Install the air baffles.
a.
b. Install the server top cover.
See
c. Return the server to the normal rack position.
See
d. Reconnect the power cords to the server power supplies and reconnect the
data cables.
See
Power on the server.
e.
See
Verify that the power supply AC OK LED is lit.
6. Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at
http://www.oracle.com/goto/ilom/docs
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
The server lists all known faults, for example:
-> show /SP/faultmgmt
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and
issue the fmadm faulty command, or log into the Oracle ILOM service processor from
the Oracle ILOM Fault Management Shell and issue the fmadm faulty command. For
more information about how to use the Oracle ILOM Fault Management Shell and
148 Oracle Server X7-2 Service Manual • October 2017
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Data Cables and Power Cords" on page
"Power On the Server" on page
show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
210.
214.
214.
for more information about the following steps.
212.