Required Tools And Equipment - Oracle X7-8 Service Manual

Required Tools and Equipment

The KIP includes the server product name, product part number (PPN), and product serial
number (PSN). The KIP are stored in the FRUID (field-replaceable unit identifiers) container of
the three server FRUs that are designated quorum members.
The quorum members include:
Disk backplane (DBP), designated as a primary quorum member.
■
Motherboard (MB), designated as a backup quorum member.
■
Power supply (PS), designated as a backup quorum member.
■
When a server FRU that contains the KIP is removed and a replacement component is installed,
the KIP of the replacement component is programmed by Oracle ILOM to contain the same
KIP as the other two components.
Note -
be completed when two of the three quorum members contain matching key identity properties.
Related Information
"Servicing Components" on page 123
■
Required Tools and Equipment
The server can be serviced with the following tools:
ESD mat and grounding strap
■
Anti-static wrist strap
■
No. 2 Phillips screwdriver
■
Non-conducting stylus
■
Labels and a pen for labeling cables
■
Mechanical lift
■
You might also need a system console device, such as one of the following:
PC or workstation with RS-232 serial port
■
ASCII terminal
■
Terminal server
■
100 Oracle Server X7-8 Service Manual • October 2017
Only one of the quorum members can be replaced at a time. Automated updates can only