Servicing The Nvme Cables; Remove The Nvme Cable Assembly - Oracle X7-2 Service Manual

Servicing the NVMe Cables

The following section describes how to service the NVMe cables. The NVMe cables are
field-replaceable units (FRUs). For more information about FRUs, see
Breakdown" on page 19
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the components to fail. To avoid
damage, ensure that you follow antistatic practices as described in
Measures" on page
Ensure that all power is removed from the server before removing or installing the
Caution -
NVMe cables. You must disconnect the power cables before performing this procedure.
The NVMe cables should be removed and replaced only by authorized Oracle
Caution -
Service personnel.
This section covers the following procedures:
"Remove the NVMe Cable Assembly" on page 185
■
"Install the NVMe Cable Assembly" on page 189
■
Related Information
"Extend the Server to the Maintenance Position" on page 59
■
"Take Antistatic Measures" on page 61
■
"Remove the Server Top Cover" on page 62
■

Remove the NVMe Cable Assembly

Prepare the server for service.
1.
and "Field-Replaceable Units" on page
61.
"Illustrated Parts
22.
"Take Antistatic
Servicing the NVMe Cables 185