Table of Contents
Advertisement
Setup Relating to Input/Output Signals
(INPUT/OUTPUT Menu)
To carry out setup operations relating to input/output signals, access the
INPUT/OUTPUT menu.
Accessing the INPUT/OUTPUT menu
In the SETUP menu, select item 2 (INPUT/OUTPUT).
The INPUT/OUTPUT menu appears.
F1
Selecting the next menu
When you have displayed the INPUT/OUTPUT menu, access the next menu
according to the data item you wish to set.
The menus you can access from the INPUT/OUTPUT menu are listed in the
following table, together with their functions, and the function keys you need
to press to access them.
Menu
SWITCH-
ER
INPUT
SWER
CRK
INPUT
INPUT
F2
F3
F4
Function key indications in the INPUT/OUTPUT menu
Menus accessed from the INPUT/OUTPUT menu
Functions
For D2 systems
Making the following settings relating to
switcher input signals
• Selecting 8- or 10-bit mode for a digital input
signal
• Selecting the GEN LOCK mode for an
analog input signal
• Adjusting the hue of an analog input signal
• Adjusting the SCH (subcarrier-to-horizontal)
phase of an analog input signal
• Adjusting the horizontal phase of an input
signal
• Selecting automatic color framing correction
by video shifting
For D1 systems
Making the following settings relating to
switcher input signals
• Selecting 8- or 10-bit mode for a digital input
signal
• Adjusting the horizontal phase of an input
signal
THRU
OUTPUT
SWER
MODE
ASSIGN
OUTPUT
F5
F6
F7
Function key See page
F3 (SWER
INPUT)
F8
F9
F10
13-17
13-19
(Continued)
13-15
Chapter 13 Setup
Advertisement
Table of Contents
