Signal Input Settings (Input Menu) - Sony DVS-9000SF User Manual

2
Select the M/E you want to logically set to the PGM/PST from the
<Logical M/E to Physical P/P> group.
P/P: assign the physical PGM/PST as logical PGM/PST.
M/E-1: assign the physical PGM/PST as logical M/E-1.
M/E-2: assign the physical PGM/PST as logical M/E-2.
M/E-3: assign the physical PGM/PST as logical M/E-3.

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
Making phase adjustment and through mode settings
Use the following procedure.
1
In the Switcher>Input menu, select the input signal to which the settings
apply.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected input signal appears in reverse video.
2
Press [Input Phase Adj].
3
To adjust the phase, adjust the following parameter.
Knob
2
Parameter Adjustment
Src No Input signal selection
Parameter Adjustment
Phase Input signal phase
Setting values
1 to 80
Setting values
–16 to +16
Setup Relating to Switcher Processor
293