Table of Contents
Advertisement
Trim setting (T1-T6)
This function adjusts the digital trim's control
step amount and operation mode (T1-T6).
Select [Trim setting] at the linkage menu and call
the setup screen shown below.
Return to Linkage
menu
Control step amount setting
1. The [Step] item tap the screen to the data
input mode.
Set the control step amount by tapping the
" ▲▲ " " ▲ " " ▼▼ " " ▼ " button.
Initial value: 4
Adjustment range: 1~200
(When the value is tapped, the control step
amount is reset to the initial value.)
*When the value is made large, the change per step becomes
larger.
Digital trim settings
When the flight conditions are set, the trim
operation can be coupled with among all the
conditions which combination mode is selected.
Separate/combination mode selection
[Comb.]: Combination mode. The trim data
are re ected at all the ight conditions.
[Separ.]: Separate mode. Trim adjustment for
each ight condition.
＜ Linkage menu ＞
79
Advertisement
Table of Contents
