Table of Contents
Advertisement
This set uses the S.
even with models that use a large number of servos. In addition the wings can be quickly installed to the
fuselage without any erroneous wiring by the use of only one simple wire even when there are a large
number of servos used.
hen using S.
S/S.
The S.
S/S.
S2 servos memorize the number of channels themselves. settable with the FX-36
The S.
S/S.
S2 system and conventional system receiver conventional CH used can be mixed.
S.BUS Glider usage example
HUB×4 ( Optional )
S.BUS Aerobatic plane usage example
S/S.
S2 system. The wiring is as simpli ed and clean mounting as possible
S2 special settings and mixes in your transmitter may be unnecessary.
Receiver: R7008SB
Servo: S3174SV×9 ( Optional )
Throttle servo: BLS173SV ( Optional )
Battery: FR2F1800 ( Optional )
Switch
Receiver: R7008SB
Aileron servo: BLS174SV×2 ( Optional )
HUB×3 ( Optional )
Rudder Servo: BLS175SV×1 ( Optional )
Elevator servo: BLS173SV×2 ( Optional )
＜ Before Use ＞
35
Advertisement
Table of Contents
