Table of Contents
Advertisement
S.
S/S.
S2 servos or a telemetry sensor can be connected directly to the FX-36. Channel setting and
other data can be entered for the S.
WARNING
Do not disconnect or turn transmitter power OFF
while S.BUS servo and telemetry sensor data is
being saved.
■ S.BUS servo and sensor save data will be lost,
resulting in malfunction.
WARNING
Do not use the S.I/F (S.BUS servo setup) connector
with anything other than high-voltage-capable
S.BUS servos.
■ Transmitter battery voltage (6.6V) is conveyed
directly.
Using anythin g ot he r t han h ig h- vo lt ag e -
capable servos presents the danger that they
will break.
＜ Before Use ＞
38
S/S.
S2 servos or sensors.
1. C nnect the .
.
. Call the set p screen.
er
ens r in a e
.
screen.
. his sets the channel an
.
*It is not necessary to carry out multiple battery
connections like a T M /T 4SG.
*
servos please use an additional power supply
hub.
And electric power is supplied to a servo with
another power supply.
●When separate power supply used
When a large number of servos are used or
when high current servos are used, the servos
can be driven using a separate Power Supply
3-way hub.
ith as sh
n in the
rn n the trans itter p
yste
en → .
en → ens r
er
r
settin
in acc r ance
ser
r tele etry
ith the .
e ice r recei er.
hen connecting many current-consuming
Green
Used when using a separate
power supply battery.
e ice y
ant t
re.
er.
ser
ith each
ther ata
r each
e ice t
be se
set
Advertisement
Table of Contents
