FUTABA FX-20 Instruction Manual
  1. Manuals
  2. Brands
  3. FUTABA Manuals
  4. Remote Control
  5. FX-20
  6. Instruction manual

FUTABA FX-20 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

FX-20-2.4G
FX-20
Radio Control
Instruction Manual
INTRODUCTION
Thank you for purchasing a Futaba digital proportional R/C system. In order for you to make the
best use of your system and to use it safely, please read this manual carefully. If you have any
difficulties while using your system, please consult the manual, our online Frequently Asked
Questions (on the web pages referenced below), your hobby dealer.
Owner's Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible.
There are many pages of setup procedures and examples. However, it need not be your sole
resource of setup guidelines. For example, the back cover includes a quick-start set of
instructions and the Frequently Asked Questions web page referenced below includes this type
of step-by-step setup instructions for a variety of other model types.
Due to potential unforeseen changes in production procedures, the information contained in this
manual is subject to change without notice. No part of this manual may be reproduced in any
form, at any time, without prior permission.
Support and Service: It is recommended to have your Futaba equipment serviced annually
during your hobby's "off season" to ensure safe operation.
Futaba Corporation
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FUTABA FX-20

Summary of Contents for FUTABA FX-20

  • Page 1 Instruction Manual INTRODUCTION Thank you for purchasing a Futaba digital proportional R/C system. In order for you to make the best use of your system and to use it safely, please read this manual carefully. If you have any difficulties while using your system, please consult the manual, our online Frequently Asked Questions (on the web pages referenced below), your hobby dealer.

  • Page 2: In North America

    Phone: 239-540-7872 Cell: 239-223-8581 OUTSIDE NORTH AMERICA Please contact your Futaba importer in your region of the world to assist you with any questions, problems or service needs. Please recognize that all information in this manual, and all support availability, is based upon the systems sold in North America only.
  • Page 3 FX-20-2.4G Federal Communications Commission Interference Statement (for U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 4 FX-20-2.4G Instruction of the FX- - - - 20 Instruction of the FX 20- - - - 2.4G 2.4G Instruction of the FX Instruction of the FX 2.4G 2.4G 1.Location SW-D SW-B SW-E SW-G SW-A SW-H Left Stick Right Stick...
  • Page 5 FX-20-2.4G Slider Fig. Bottom view Ni-MH battery Fig. Inside view (Battery box) 2. 2. 2. 2.Charging the battery Charging the battery Charging the battery Charging the battery 1-1. Please confirms the power switch is off. 1-2. Insert the plug of the charger to charging bush of transmitter.

  • Page 6: Servo Monitor

    FX-20-2.4G ３． ３．Operation of the touch sensor ３． ３． Operation of the touch sensor Operation of the touch sensor Operation of the touch sensor Operation Contents Condition Working Touch part Short touch At the screen have some pages. The cursor jumps to top of next (Ex.
  • Page 7 FX-20-2.4G of “RTN” Input data mode Increment or decrement the data. Select Yes or No, and so on. 4. 4. 4. 4.Turns on the transmitter Turns on the transmitter Turns on the transmitter Turns on the transmitter 4-1 Power switch is to be on. The red LED is light. LCD displays the bar graph at moment.
  • Page 8 FX-20-2.4G 5 5 5 5 ． ． ． ． Basic operation of Basic operation of Basic operation of editing Basic operation of editing editing editing LCD screen is consists of editing button and monitor display. You can go through editing menu by touch sensor.
  • Page 9 FX-20-2.4G 7. 7. 7. 7.Linkage menu Linkage menu Linkage menu Linkage menu The linkage menu sets the primary data of the each model. These data are common to every flight condition. If you touch “LNK” of the touch sensor over 1 second, you can get into the linkage menu screen.

  • Page 10: Specification

    FX-20-2.4G Specification Specification Specification Specification FX-20-2.4G SPECIFICATIONS 1 Radio Characteristics Engineering standard Part 15.247 FCC (U.S.) 50mW RF power output Modulation Direct-Sequence Spread-Spectrum Communication scheme Single communication Frequency band 2405.376MHz - 2477.056MHz (general mode) 2407.424MHz - 2450.432MHz (France mode) Channel...

Table of Contents