Table of Contents
Advertisement
Your Futaba FX-36 transmitter programming can be updated easily online. When functions are added
or improved, the update le can be downloaded from our website. Copy the update les to the SD card
and then use the following procedure to update the program.
Check our web site for the FAQ regarding updating for more information.
Updating procedure
Note: If the battery fully discharges during
program updating, updating will fail. When
the remaining battery capacity is 50
less, always recharge the battery before
updating.
Note: The model data in the transmitter can
be used unchanged after updating, but to
be safe, back up the model data before
updating.
1. Download the zip file of the update data
from our website.
Futaba WEB
FX-36 Update Zip file
Download
2. Extract the zip le on your computer.
3. The "FUTABA" folder will be created on your
computer.
4. Copy the "FUTABA" folder into your SD card.
Copy the "FUTABA"
folder into your SD card.
Note: If the SD card has already had "another
FUTABA" folder before you make a copy, the
"FUTABA" folder is OVERWRITTEN.
5. Insert the SD card with "FUTABA" folder that
contained the update software into the SD
card slot on your FX-36 radio transmitter.
or
6. Turn on the transmitter power while pressing
down the "H/E" button. The update screen
appears on the LCD display of your FX-36
and the software update is started.
Press the H/E switch and turn on
Installed SD card of the
update file
2
Updating
＜ Data ＞
1
181
Advertisement
Table of Contents
