Table of Contents
Advertisement
Telemetry : GPS [Altitude, Variometer, Position]
The Altitude, Variometer, Position screen
displays and sets the data from an SBS-01/02G
(GPS sensor) sold separately.
*The GPS sensor is necessary, and is sold separately. Mount
and connect the sensor in accordance with the sensor
instruction manual.
Select [GPS] in the Telemetry screen and
access the setup screen shown below.
Return to
Linkage menu
Max. and min. values
s i n c e t h e p o w e r
was turned ON will
display.
Refer to the former
p a g e f o r a s e t u p
about Altitude and
Variometer.
T h i s i n d i c a t e s t h e
r e c e i v i n g a c c u r a c y
from a GPS Satellite.
When three bars are
displayed, the GPS is
ready for use.
108
＜ Linkage menu ＞
*A GPS sensor must be installed in the aircraft.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
FASSTest12CH mode.
*The FASSTest18CH /T-FHSS mode can use all the telemetry
functions.
The position of the present
model is displayed.
Altitude
Variometer
Advertisement
Table of Contents
