Table of Contents
Advertisement
VR selection
[Setting method]
1. Control selection
Tap the [Control] "--" button to call the
<Hardware select> screen, and then select
the switch and its ON direction.
2. Mode selection
Tap the [Mode] button, and then select the
mode ([LIN.], [ATL+], [ATL-], or [SYM.]).
3. Rate adjustment
Tap the [Rate] "value" button.
Set the rate using the " ▼ ▼ " " ▼ " " ▲ "
"
" buttons
Initial value: 0
Adjustment range: -100 ~+100
(When the value is tapped, the rate is reset to the initial
value.)
After setting, press a H/E button
Rate adjustment
Operation mode selection
*The operation modes which can be
selected depend on the function.
(Fine tuning VR operation position)
[Fine tuning VR operation mode]
[LIN.] M i x i n g r a t e 0
When the VR is turned clockwise and
counterclockwise, the mixing rate
increases and decreases, respectively.
[ATL+] Mixing rate 0
When the VR is turned, the mixing rate
increases.
[ATL-] Mixing rate 0
When the VR is turned, the mixing rate
increases.
[SYM.] When the VR is turned to the left or
right of the neutral position, the mixing
rate increases.
LIN.
ATL+ ATL-
a t c e n t e r o f V R .
at left end of VR.
at right end of VR.
SYM.
＜ Data ＞
171
Advertisement
Table of Contents
