Table of Contents
Advertisement
Telemetry Alarm Duration and Repeat time
The repeat time and duration time for the telemetry alarm (buzzer, vibration and speech) can be set.
Tap the [Telemetry Setting] button in the Linkage
menu to call the setup screen shown below.
Duration
It is an alarm output time.
Setting range：1 s ∼ 30 s
Initial value：INH
Duration value has to be less than
repeat value.
Duration time is extended when the
other alarm event occurs.
e.g. Repeat time is 8 seconds and Duration time is 5 seconds.
Repeat time 8s
Alarm
ON
output
Duration time 5s
Duration is not displayed when
Repeat is INH.
OFF
ON
Repeat
It is a repeat time of an alarm
output.
Setting range：INH，1 s ∼ 240 s
Initial value：INH
OFF
ON
＜ Linkage menu ＞
OFF
113
Advertisement
Table of Contents
