Table of Contents
Advertisement
The System menu sets up functions of the
transmitter. This does not set up any model data.
Return to Home screen
[Display]: Display adjustment.
[Sound volume]: Adjust the volume of: Other sound, Warning, Voice
[Date and Time]: Sets the date and time (system clock setting) and resets the system timer.
[H/W setting]: Stick mode selection (Mode 1 - Mode 4 ). J1-J4 sticks correction can be performed.
[Battery] : Battery alarm voltage setting. Auto power off time setting.
Attention: When using the 5-cell NiMH battery, the alarm setting is 5NiMH. If you
use a 2SLiFe battery, change the setting for the undervoltage warning to 2LiFe, if you
use a 2SLiPo battery, change the setting to manual setting 7,0V.
[Battery] : Battery alarm voltage setting. Auto power off time setting.
[Range check] : The output of the transmitter is lowered, for Range checking.
[S.Bus servo]: S.Bus servo setting.
[Information]: Sets the User name, Language, and Unit system. Displays the program version, and SD
card information.
SYSTEM MENU
When the System menu button is tapped,
the menu shown below is called up. Tap the
function button that you want to enter.
＜ System menu ＞
55
Advertisement
Table of Contents
