T1-T6 Setting (Trim) - FUTABA T18SZ Instruction Manual

T1-T6 setting (Trim)

Select [T1-T6 setting] at the linkage menu and call
the setup screen shown below.
Return to Linkage
menu
Control step amount setting
1. The [Step] item tap the screen to the data
input mode.
Set the control step amount by tapping the
" ▲▲ " " ▲ " " ▼▼ " " ▼ " button.
Initial value: 4
Adjustment range: 1~200
(When the value is tapped, the control step
amount is reset to the initial value.)
82 ＜ Linkage menu ＞
Digital trim settings
Separate/combination mode selection
[Comb.]: Combination mode. The trim data
are re ected at all the ight conditions.
[Separ.]: Separate mode. Trim adjustment for
each ight condition.