Table of Contents
Advertisement
FX-22/FX-30/T14SG/T12FG
The model data (only latest version) of FX-22/FX-30/T14SG/T12FG can be copied to FX-36.
* SD card is required.
* The model data of FX-36 cannot be copied to FX-22/FX-
30/T14SG/T12FG.
* Functions in FX-22/FX-30/T14SG/T12FG, functions not
in FX-36 are not converted.
[Model data conversion method]
1. Attach an SD card that contains model data
of FX-22/FX-30/T14SG/T12FG to the SD slot of
a FX-36.
2. Turn on the power switch, and the Data
Converter should run.
3. The converter shows a list of model data in
the card. Select a model data that you want
to convert and push "CONVERT" → "Yes" key,
and the converter should begin converting
data.
4. If the convert succeeds, the converter will
show the following message. The converted
data are copied to the internal memory
of the FX-36. Hence, if the FX-36 does not
have available space in its internal memory,
converts must fail.
Makuhari Techno-Garden Bldg. B-6F, 1-3 Nakase, Mihama-ku, Chiba, 261-8555, Japan
FX-36 MODEL DATA CONVERSION
FUTABA CORPORATION
Phone: +81-43-296-8259, Facsimile: +81-43-296-8253
5. The converter can accept model data
made by FX-22/FX-30/T14SG/T12FG with the
latest software only. If you try to convert
model data made by old version software,
the converter must fail to convert and show
the following error message. If this message
is shown, do the following procedure to
update the model data in order to avoid
this limitation.
(a) First, update a FX-22/FX-30/T14SG/T12FG to the latest
software.
(b) Load the model data which failed to convert into the FX-
22/FX-30/T14SG/T12FG with the latest software, and the
model data should be updated to the latest format.
(c) Save the updated model data to a SD card.
(d) Retry to convert the updated model data on a FX-36.
* When SD card cannot be recognized, it may be able to
be used if it reformats by SD formatter offered from SD
Association.
SD formatter is downloadable from SD Association
https://www.sdcard.org/ (As of June, 2017)
CAUTION
After nishing data copy, be sure to perform a
complete check of operation with the model to
be used.
Check well all the directions of operation and
all the operation switches.
Important: Always check the operation of
the model prior to ight.
©FUTABA CORPORATION
2017, 10 (1)
＜ Data ＞
183
Advertisement
Table of Contents
