Table of Contents
Advertisement
Vario Melody Setting
Range
When the variometer is greater
than this value, Vario melody is
not variable.
Setting range：
Offset value ∼ +50m/s
Initial value：5.0m/s
Offset
This is the changing point of climb and sink. When the variometer
is greater than this value, Vario Melody is climb type. When the
variometer is less than this value, Vario Melody is sink type.
Setting range：Range
setting value ∼ Range
Initial value：0.0m/s
When the variometer is less than
this value, Vario melody is not
variable.
Setting range：
-50m/s ∼ Offset value
Initial value：-5.0m/s
setting value
Tap the [Set] button
Current variometer
Next page
Deadband
When the variometer is less
than this value, Vario melody
is not output.
Setting range：0m/s ∼ +50m/s
Initial value：0.0m/s
Fixed melody
Range↑
Variable melody
Deadband↑
Dead band
Offset
（Not sound）
Deadband↓
Variable melody
Range↓
Fixed melody
＜ Linkage menu ＞
*These settings can be
made for each sensor.
W h e n t h e v a r i o m e t e r i s
greater than this value, Vario
melody is not
output.
Setting range：-50m/s ∼ 0m/s
Initial value：0.0m/s
Climb side
Discontinuous
sounds
Sink side
Continuous
sounds
101
Advertisement
Table of Contents
