Table of Contents
Advertisement
Tap the panel with your finger to enter
data.
*Plastic lm is attached to the Touch Panel. Please
be careful so that you don t scratch the Touch Panel
with anything hard such as a metal object. Don t
push the Touch Panel with excessive force or drop
anything on the panel.
*Although you may nd some air bubbles under the
plastic panel due to environmental changes such
as temperature it is not a defect and will cause no
problems.
*Color
D is made from many pixels. Some
pixels hold lighting. Moreover some pixels go out.
And a screen may flicker. Such condition is the
characteristics of color
Button
H/E
D. It is not failure.
Button
U/M
Tapping the settings buttons for
each value on the settings screen
will cause value input buttons to
appear at the top of the panel.
Pressing and holding a value will
return it to its default setting.
Value input buttons display at the
top of the panel.
Large change
Small change
in value
in value
H/E
Press
Press and hold
Press from HOME
screen.
Press and hold from
HOME screen.
Press
Press and hold
Large change
in value
Return to the previous
screen
Return to the home screen
To Telemetry display
Panel lock / Lock release
U/M
To user menu display
To servo monitor display
＜ Before Use ＞
19
Advertisement
Table of Contents
