To Create A Flat Limit Line - HP 8711C User Manual

Using instrument Functions
Using limit Testing
In this example, you will create a minimum limit line from 155 MHz to
195 MHz at a level of -3 dB.
1. To access the limit line menu press ($EiZVJ Limft M%rtu .
7. Notice that the analyzer has generated a limit line at about the center of
8. lb get a less distracting view of the limit line, press (-1
9. lb see if your flter meets the minimum limit you have just set up, press
10. The display will now indicate on the display whether the DUT has passed
11. 'lb edit a current limit line and to see what a fail indicator looks like,
12. Notice the display now shows the FAIL,
4-30
深圳市盛腾仪器仪表有限公司
the display.
Prior bfsnu Limit Menu Limit Test On.
or failed when compared to the current limits. If you are using the filter
that was shipped with your instrument, you should see a PASS indicator.
press Edit Limit and set the Begin
Tel:0755-83589391
Min
Line .
and hd Limit; to 0 dB.
indicator.
Fax:0755-83539691 Website: www.Sengt.c