HP 8711C User Manual page 438

To Disk
EPROM
To
深圳市盛腾仪器仪表有限公司
measurement trace and calculates the frequency span, mean, and standard
deviation of the amplitude response, and the peak-to-peak ripple.
See "To Use Marker Math Functions" in Chapter 4 for more information.
Access Keys: (jjJ
(Option lC2, IBASIC,
ready to run, this softkey steps through the program one line at a time. Good
de-bugging tool.
See HP Instrument BASIC User's Handbook
the
Access Keys:
[
SYSTEM OPTIONS
frequency is 1.3 GHz for HP 8711C and 3.0 GHz for HP 8713C.
setting the start and stop power points.
See power Srx?ep entry in this chapter for more information on the power
sweep function.
internal volatile RAM to a disk in the analyzer's built in 3.5" disk drive. This
function is used to make a backup copy of CC data.
See the Service Guide for more information.
Access Keys:
[
SYSTEM OPTIONS
internal volatile RAM to EPROM. This function is used so that current CC
data is not lost when power to the analyzer is turned off.
See the Service Guide for more information.
Access Keys:
[
SYSTEM OPTIONS
Tel:0755-83589391
for more information.
)
Update Cow CuxLst
)
Update Corn Coxxst
)
Fax:0755-83539691
Reference
S
9 - 7 5
Website: www.Sengt.c