Data Entry Using A Barcode Reader - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
Devices under test (DU'I3) are often labelled with a serial number and part
number. If the DUT is labelled with this information in barcode form, a
barcode reader can be used to enter the DUT information into the analyzer
or into the computer controlling the analyzer. Doing so provides a simple
and safe link between the device under test and the measurement data.
Information such as the operator's name or test station number can also be
entered, to allow correlation of the devices tested with the test station.
Connect a barcode reader, such as the HP KeyWand HEXK-1210, to the
analyzer's DIN KEYBOARD connector (on the rear panel). Once connected,
the barcode reader will send scanned barcode characters to the analyzer just
as if they were typed on a keyboard. The barcode characters will be followed
by a carriage return. The barcode wand and the external keyboard can be
connected simultaneously.
See "Using the Analyzer's Title Feature," next in this section, for more
information on using the title feature with a barcode reader.
In addition to Hewlett-Packard's barcode wand, other vendors offer products
such as cordless barcode readers, laser scanner readers, barcode label
printers, barcode fonts for Windows@, and barcode labeling software.
Tel:0755-83589391
Automating Measurements
Fax:0755-83539691
Operator Interaction
7 - 2 9
Website: www.Sengt.c