HP 8711C User Manual page 145

To Move the Pass/Fail
Indicator Text and Icon
To Turn the Pass/Fail
Indicator Text end loon
On and Off
Using a Marker During
limit Entry
深圳市盛腾仪器仪表有限公司
The limit test pass/fail indicator and text can be moved to any position on the
display screen.
lb move the position of the pass/fail indicator:
can also place the indicator along the horizontal by entering a percentage
using the numeric keypad. Enter a whole number from 0 to 100, where 0
represents the far left of the display, and 100 represents the far right of
the display.
3. Press Limit Icun Y Pasi$ion and use the front panel knob or the
can also place the indicator along the vertical by entering a percentage
using the numeric keypad. Enter a whole number from 0 to 100, where
0 represents the bottom of the display, and 100 represents the top of the
display.
You
can toggle on or off the pass/fail indicator text (which contains the
measurement channel number and the word "pass" or "fail," such as 1: FAIL)
by pressing (-1 Limit Menu L&nit. OpH6ns Limit Text ON off .
You can toggle on or off the fail icon (there is no "pass" icon-only text) by
pressing @GiX) Limit Menu Limit Opt iuns Limit
Pressing the (KMKi!Q softkey while entering a limit line will activate a
marker. The marker can be used to determine a frequency or level of interest
on the device response.
Tel:0755-83589391
Using Instrument Functions
Fax:0755-83539691
Using limit Testing
off .
4-43
Website: www.Sengt.co