L-L. Maximum Hp-Ib Cable Lengths - HP 8711C User Manual

Installing the Analyzer
Step 4. Configure the Analyzer
Parallel and Serial
Parallel and serial devices often require speciEc cables-check their manuals
Connections
for details. Parallel cable length should not exceed 25 feet. The analyzer may
experience problems talking to a printer if this length is exceeded. Connect
the required control cables and secure them. (Tighten the knurled screws or
comparable fasteners.)
Other Connections
If you plan to use a keyboard, external video monitor, or external detectors,
connect them to the appropriate rear panel connectors. See Figure l-4. Also
see Chapter 8 for more information on front and rear panel connectors.
1-14
深圳市盛腾仪器仪表有限公司
Table l-l. Maximum HP-IB Cable Lengths
in System
Two
Fifteen (maxl
Tel:0755-83589391
Between Each Pair
of Devices
20 m ltotall
Fax:0755-83539691 Website: www.Sengt.c