HP 8711C User Manual page 440

Bandwidth
[
SYSTEM OPTIONS
深圳市盛腾仪器仪表有限公司
receiver section of network analyzer.
See "lb Reduce the Receiver Noise Floor" and the table below for more
information on system bandwidth.
System BW
Wide
Medium Wide Idefaultl Medium
Medium
Medium Narrow
Narrow
Fine
in [
SYSTEM OPTIONS
beeper volume, adjust CRT settings, and configure the rear panel USER TTL
the HP instrument bus. Required mode for interfacing with l-P-lR peripherals
(printers, plotters, and disk drives). Also required by IBASIC to talk to HP-lR
peripherals. This operation mode is not selectable with another active
controller on the bus.
See the Pro~ammer's Guide for more information.
Access Keys:
)
Refer to "When to Change the System Impedance" in Chapter 3 for more
information.
Access Keys: ICAL) Cal Kit;
Tel:0755-83589391
Dynamic Range Sweep Speed
Fastest
Faster
Medium
Medium Slow
High Slower
High Slowest
menu. Displays menu to adjust clock setting, set
]
]
OPTIONS
Fax:0755-83539691
Reference
Approximate BW
6500 Hz
4000 Hz
3700
Hz
1200 Hz
250 Hz
15 Hz
9-77
Website: www.Sengt.c
S