HP 8711C User Manual page 283

Automating Measurements
Operator Interaction
58 Message:
59
60
61
62
63
64
65
loading a
A War BEGIN program can be automatically loaded at power up if the
program is named "AUTOST" . An "AUTOST" program is loaded at power up
from the internal non-volatile memory or from a 3.5" floppy disk inserted into
Program
the analyzer's 3.5" disk drive. When the USW 3EGXf key is pressed, the
program will remain idle until it is needed. The program remains idle until a
is executed, the program returns to idle. Refer to example programs provided
on the BASIC programs disk for U~W BE!+Xf example programs. Use of the
feature, nor does this key affect sweep update rates.
7-26
深圳市盛腾仪器仪表有限公司
!
OUTPUT QHp8714;"DISP:ANN:MESS "'&Strl$&CHR$(lO)&
RETURN
!
END
N O T E
For more US&T programs,
supplement. The disk and handbook are shipped with analyzers with the
not
restrict access to any normally available front panel
Tel:0755-83589391
see
the
Fax:0755-83539691
HP Instrument
and the
Website: www.Sengt.c