HP 8711C User Manual page 381

Data
Data and
traces, with identical scaling and format. You must have selected
Use care in interpreting memory trace values. The memory trace may have
CAUTION
been stored under conditions different from the current measurement trace.
Data
current measurement data. Data can be saved by itself or with the
instrument state and current calibration.
this key to function, you must first have selected Data->Mem and stored a
data trace in memory.
active measurement channel.
time as Day-Month-Year HourMinute.
See Clock Fomat in this chapter for more information on clock format.
Access Keys:
Clock Format
panel USER TTL IN/OUT connector for general purpose I/O use with IBASIC
and SPCI commands. This connector can also be configured for softkey
sequencing using an external switch, and as a sweep out connector.
See "User-Dehned TTL Input/Output" in Chapter 7 and "BNC Connectors" in
Chapter 8 for more information.
9-18
深圳市盛腾仪器仪表有限公司
Reference
System Ca&ig Set Clack
[ )
SYSTEM OPTIONS
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c