HP 8711C User Manual page 169

To Save Measurement
Data in ASCII Format
深圳市盛腾仪器仪表有限公司
Your measurement data can be saved in an ASCII format that is compatible
with many personal computer software packages.
lb save the measurement trace as an ASCII file:
1. Press
]
RECALL
to
where you want to save your file. (See "Select the Disk," earlier in this
section .)
Lotus 123 format is a two-column format that is compatible with
l
many personal computer software packages. Column 1 is the
frequency point, and column 2 is the measured value at that point.
Touchstone format is useful for importing measurement data into
l
CAE programs such as Hewlett-Packard's Microwave Design System
(MDS). Touchstone format provides for analyzers with either 50 Q
or 75 0 impedance. Since your analyzer cannot make full two-port
measurements, saving in Touchstone format is generally only useful
when measuring reflection (&I).
Save
measurement channel data you want to save.
3. The fIlename appears on the network analyzer screen as TRACE# .PRN-
for Lotus l-2-3 files-or TRACE# . SlP-for Touchstone fles-where # is a
number the analyzer selects from 0 to 999.
r
N O T E
Your analyzer can store files only on floppy disk that are formatted in MS-DOS.
Tel:0755-83589391
Saving and Recalling Measurement Results
Select Disk and select the softkey that corresponds
Save ASCII .
Fax:0755-83539691
Using Instrument Functions
4-67
Website: www.Sengt.c