HP 8711C User Manual page 375

C
(Option 100 on&) S
and SRL measurements.
information.
(CAL)
the current measurement mode.
See Chapter 6 for information on calibrating the analyzer.
Cal Cheek
check feature will compute and display corrected measurement uncertainties
(residual errors) that apply to the current instrument settings and
calibrations. This information may be used as an analysis or troubleshooting
tool when making transmission and reflection measurements.
See Chapter 6 for more information on using cal check.
(default), Type-N male, 3.5 mm (for use with 50 Q systems), Type-F female
(for use with 75 0 systems), or user-dehned.
By convention, cal kits indicate the sex of the zmrt with which they are used.
For example the default cal kit for the analyzer is type-N
front panel RF ports are female (the calibration standards, in turn, are male).
This same convention applies to whatever test "port" the standard is attached
to, be it an adapter, cable, fixture, etc.
See Chapter 6 for more information on calibrating the analyzer.
Cal
measurement calibration along with the current instrument state.
on OFF
See "Saving and Recalling Measurement Results" in Chapter 4 for information
on saving instrument states and measurement results to hles.
Access Keys:
9-12
深圳市盛腾仪器仪表有限公司
Reference
o ftk ey in CBEGIN) menu. Used to perform fault location
See your Option 100 User's Guide Supplement
[
SAVE
Tel:0755-83589391
because the
Fax:0755-83539691
for
Website: www.Sengt.c