HP 8711C User Manual page 273

Automating Measurements
Configuring Your Test System
HP VEE
HP VEE is a powerful application which lets you graphically create programs
to control your instrument. VEE automatically handles the programming
details so you can focus on higher level tasks. It also contains statistical
functions which you can use to monitor your production process.
VEE runs on PCs and HP-UX and Sun Workstations.
VEE is used in conjunction with a VEE instrument driver. The VEE
instrument driver presents the user with a picture of the instrument's front
panel on the computer display. Using the mouse, the user clicks on the front
panel keys to control the instrument, similar to IBASIC keystroke recording.
For information on VEE including literature and preview disks, please call the
HP Test and Measurement Call Center at l-800-452-4844, extension 9141.
Outside the U.S., contact your nearest HP Sales or Service office. Refer to
Chapter 10 for a table of sales and service offices.
Microsoft@
It does not offer a rich keyword set as does HP BASIC, and is not optimized
for instrument control. lb control the analyzer via HP-IB, an HP-R3 card and
driver library must be installed. The driver library will provide subroutines
such as IOOUTPUT and IOENTER which let you control your analyzer.
C and C++
If you are using C or C + + , you will need to link in a driver library to use
your HP-II3 card. HP offers a library called Standard Instrument Control
Library (SICL). SICL is available for PCs running Microsoft Windows and
using HP's HP-IB card. SICL is also available on HP series 700 UNIX
workstations.
For LAN communication with your analyzer, C or C+ + are often used.
Multi-threaded programs can be created to allow easy and precise control of
many analyzers operating asynchronously. This approach maximizes speed
and throughput.
7-16
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c