Synchronizing And Positioning The Display - HP 8711C User Manual

Using Instrument Functions
The analyzer provides a CRT adjustment feature which can be used to get
an external monitor to synchronize properly, and to optimize the display's
position. The following list explains how to use the CRT adjust features.
The CRT adjust settings also affect the analyzer's built-in display.
C A U T I O N
1.
2.
3.
4.
5.
4-100
深圳市盛腾仪器仪表有限公司
Press [ ]
SYSTEM OPTIONS
is pressed a test pattern appears on the monitor(s). If you don't want the
test pattern on the display while adjusting it, press Remove
If your external monitor is a sync-on-green-signal monitor, press the
Use the Vsrt;ical
the display's position on the monitor. After pressing one of these softkeys,
use the front panel knob, the @) (JJ keys, or the numeric keypad to vary
the position of the display on the monitor.
For synchronizing your external monitor, use the
Parch , Hmimmtal
the vertical and horizontal front and back porch times until the display is
optimal. Use Rrsstore Defaults if necessary.
All of these settings are retained when the analyzer is turned off or preset.
Tel:0755-83589391
and Horizrsntdt Paei%ian keys to vary
Porch ,
Fax:0755-83539691 Website: www.Sengt.c