Peripheral State - HP 8711C User Manual

Preset State and Memory Allocation
When you preset the analyzer with the (PRESET_) hardkey or the SCPI
command "SYST : PRESET", or cycle power, the settings below are saved in
non-volatile memory and thus are not affected. The analyzer is shipped from
the factory with the settings in the following table. These settings will remain
as shown, until changed.
User BEGIN menu
Distance Units1
1 Analyzers with Option 100 only
Color options lfor external monitor)
Velocity facto?
Option 100 only
1
12-8
深圳市盛腾仪器仪表有限公司
(BEGIN) Key Settings
(CAL) Key Settings
Tel:0755-83589391
Factory default
1.0 [speed of light]
Fax:0755-83539691 Website: www.Sengt.c