HP 8711C User Manual page 172

Using Instrument Functions
Saving and Recalling Measurement Results
To Delete a File
1.
2.
3.
To Copy a File
1.
2.
3.
There will be no warning from the analyzer if the destination ille already
C A U T I O N
exists. It will be overwritten without warning. For instance, STATEl. STA
on the internal memory disk and STATE1 . STA on a floppy disk in the
built-in disk drive may contain completely different sets of data. If you copy
one of those files to the other without editing the lile name, the iile will be
overwritten with the source file.
4. To copy the file press Enter .
6. You will then be prompted to tell the analyzer where on the destination
4-70
深圳市盛腾仪器仪表有限公司
Highlight the Iile to be deleted by using the front panel knob or the m (JJ
keys.
Press N&&s File YES
'lb delete all hles within the current directory, press IMete ALI. Fflos
YES.
Highlight the file to be copied by using the front panel knob or the ch) (JJ
keys.
Press Copy File and then select the destination disk for the file to be
copied. You will then be given the opportunity to edit the destination hle
name if you wish.
Use a keyboard (if connected) or the front panel knob and the softkeys to
enter the destination filename.
then select the destination disk for the files to be copied.
disk to put the files to be copied.
Press Enter if you want the files to go into the main, or root, directory of
the destination disk. Use a keyboard (if connected) or the front panel knob
and the softkeys to enter a subdirectory on the destination disk before
pressing Enter .
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c