HP 8711C User Manual page 42

Entering Frequency
Range
深圳市盛腾仪器仪表有限公司
1. Press the (FREQ) key to access the frequency softkey menu.
softkeys. For instance if you set the center frequency to 160 MHz and the
span to 300 MHz, the resulting frequency range would be 10 to 310 MHz.
N O T E
When entering frequencies, be sure to terminate Your numeric entry with the appropriate softkey to
obtain the correct units. If you use the (ENTER) key to terminate a frequency entry, the units
default to Hz.
The default displayed frequency resolution is kHz. You can change the resolution by pressing IFREQ)
Disp Freq ReaoluIAon
Tel:0755-83589391
Entering Measurement Parameters
, and then selecting a new resolution.
Fax:0755-83539691
Getting Started
2-7
Website: www.Sengt.c