To Use Other Marker Functions - HP 8711C User Manual

Using Instrument Functions
Using Markers
To Use Marker to
This function changes the analyzer's center frequency to that of the active
Center Frequency
marker and limits the span if necessary. If the markers are all off, and this
function is selected, it first turns on marker 1 at its previous setting or, if no
previous setting, at the center frequency (default).
1. Press (jj] and then use the front panel knob or the numeric keypad
2. Press ME&SW FWICIACULS Maker -> Gears and note that the trace
To Use Marker to
This function changes the value of the analyzer's reference level to the
Reference
amplitude value of the active marker. This function does not change the
reference
center frequency (default).
1. Press @iiKE] and then use the front panel knob or the numeric keypad
2. Press
4-28
深圳市盛腾仪器仪表有限公司
to move the marker to 200 MHz.
has now shifted and that the center frequency of the analyzer is now
200 MHz.
If the markers are all off, and this function is selected, it
to move the marker to about - 10 dB.
trace has now shifted up and that the marker is exactly on the reference
level.
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.c