Using The Analyzer's Title Feature - HP 8711C User Manual

深圳市盛腾仪器仪表有限公司
The analyzer has two 30-character title lines which can be entered
using the barcode reader. From the front panel, press (j-1 Hare
Then use the barcode reader to scan in the information from the DUT or
use a keyboard to type in the information. Once stored in the title line, the
information will be included on hardcopy dumps. The title lines can also be
set or queried using the following SCPI command:
For example:
OUTPUT QRfna;"DISP:ANN:TITLl:DATA 'BPF-177, SN US95170001"'
and
OUTPUT QRfna;"DISPlay:ANNotation:TITLel:DATA?"
ENTER ORfna;Titlel$
Use the command
to display or hide the title. If you are using IBASIC, you can use the INPUT
statement to read in barcode or keyboard characters. For example:
30 INPUT "Scan in the Barcode now",Dut$
40 OUTPUT 800;"DISP:ANN:TITLl:DATA "';Dut$;"'"
50 OUTPUT 800;"DISP:ANN:TITLl ON"
60 END
Tel:0755-83589391
Automating Measurements
Fax:0755-83539691
Operator Interaction
7-31
Website: www.Sengt.c