HP 8711C User Manual page 420

Portrait
Power
深圳市盛腾仪器仪表有限公司
(Option
secured program lines can not be listed, seen, or edited.
See HP Instrument BASIC User's Handbook
the
Access Keys:
[
SYSTEM OPTIONS
is oriented with shorter edge at top and longer edges at sides. Portrait is the
default setting, and toggles with L%~&%c%p% .
Access Keys: [-COPY) p%f iae Printer
measurements.
See "Making a Power Measurement" in Chapter 3 for an example power
measurement.
Access Keys: (jBEGIN] Anplif fey or (MEAS1) m (j-1
turns it on and off. Also allows setting of parameters for power sweep.
used to characterize power-sensitive circuits. In this mode, power is swept
at a single frequency. The start- and stop-power values are selectable under
the (POWER) key. This feature is convenient for such measurements as gain
compression or automatic gain control (AGC) slope.
The span of the swept power is limited to being equal to or within one of the
seven pre-deiined power ranges.
Power sweep is independent of level. Use this function with frequency CW
mode only.
Tel:0755-83589391
for more information.
)
Fax:0755-83539691
Reference
P
9 - 5 7
Website: www.Sengt.c