深圳市盛腾仪器仪表有限公司
The operator's check should be performed when you receive your instrument,
and any time you wish to have confidence that the analyzer is working
properly. The operator's check does not verify performance to specifications,
but should give you a high degree of confidence that the instrument is
performing properly if it passes.
The operator's check consists of making a transmission measurement with the
cable that was supplied with your analyzer, and a reflection measurement
with the cable and again with a 50 62 or 75 62 termination (load).
Tel:0755-83589391
Fax:0755-83539691
2-13
Website: www.Sengt.c